arrow_back
MODULE 1: QA QC Fundamentals for Oil and Gas Projects
1-QAQC-Fundamentals-for-Oil-and-Gas-Projects_pdf_1080p
Role of QA QC in oil and gas construction
Difference between quality control and site execution
Responsibilities of QA QC engineer and inspector
MODULE 2: Aramco Quality Management System Overview
2-Aramco-Quality-Management-System-Overview
Quality philosophy followed in Aramco projects
Contractor quality obligations and approvals
Interface between client, consultant, and contractor
MODULE 3: Codes, Standards, and Specifications
3-Codes-Standards-and-Specifications
International standards used in oil and gas civil works
Aramco engineering standards overview
Project specifications and drawings hierarchy
MODULE 4: Quality Documentation and Control
4-Quality-Documentation-and-Control
Quality plan preparation and approval
Method statements and inspection requirements
Record keeping and traceability
MODULE 5: Inspection and Test Plans (ITP)
5-Inspection-and-Test-Plans-ITP
Structure of ITP for civil and pipeline works
Hold points, witness points, and review points
Linking ITP with site activities
MODULE 6: Material Inspection and Approval
6-Material-Inspection-and-Approval
Material submittals and approvals
Incoming material inspection procedures
Storage, handling, and preservation checks
MODULE 7: Civil Works Scope in Oil and Gas Projects
7-Civil-Works-Scope-in-Oil-and-Gas-Projects
Typical civil works in plants and pipelines
Interface between civil and mechanical works
Quality risks in civil construction
MODULE 8: Earthwork and Excavation QA QC
8-Earthwork-and-Excavation-QAQC
Excavation inspection requirements
Soil classification and suitability checks
Dewatering and excavation safety quality checks
MODULE 9: Backfilling and Compaction Control
9-Backfilling-and-Compaction-Control
Approved backfill materials
Layer thickness and compaction requirements
Field density testing and acceptance
MODULE 10: Concrete Works Quality Control
10-Concrete-Works-Quality-Control
Concrete material approval and mix design
Formwork, reinforcement, and embedment checks
Pouring, curing, and strength verification
MODULE 11: Reinforcement Steel Inspection
11-Reinforcement-Steel-Inspection
Rebar material certification and storage
Cutting, bending, and fixing inspection
Cover, spacing, and lapping checks
MODULE 12: Foundations for Equipment and Pipelines
12-Foundations-for-Equipment-and-Pipelines
Foundation layout and level verification
Anchor bolts and inserts inspection
Foundation acceptance prior to erection
MODULE 13: Precast and Structural Civil Elements
13-Precast-and-Structural-Civil-Elements
Precast element quality checks
Installation tolerances and alignment
Grouting and finishing inspection
MODULE 14: Pipeline Route Survey and Alignment
14-Pipeline-Route-Survey-and-Alignment
Route survey verification
Alignment, chainage, and levels control
Right-of-way inspection requirements
MODULE 15: Trenching for Pipelines
15-Trenching-for-Pipelines
Trench dimensions and slope requirements
Bedding preparation inspection
Trench safety and stability checks
MODULE 16: Pipe Material Inspection
16-Pipe-Material-Inspection
Pipe coating and condition checks
Dimensional and visual inspection
Identification and traceability
MODULE 17: Pipe Stringing and Handling
17-Pipe-Stringing-and-Handling
Stringing layout inspection
Handling damage prevention
Coating protection checks
MODULE 18: Welding Quality Control (Interface)
18-Welding-Quality-Control-Interface
Coordination with welding inspectors
Visual inspection before and after welding
Repair control and documentation
MODULE 19: Field Joint Coating Inspection
19-Field-Joint-Coating-Inspection
Surface preparation requirements
Coating application inspection
Holiday testing and repair
MODULE 20: Lowering and Laying Inspection
20-Lowering-and-Laying-Inspection
Padding and support inspection
Lowering operation quality checks
Alignment and stress control
MODULE 21: Backfilling and Reinstatement for Pipelines
21-Backfilling-and-Reinstatement-for-Pipelines
Approved padding and backfill material
Compaction around pipeline
Surface reinstatement requirements
MODULE 22: Hydrotesting and Cleaning (QA QC Role)
22-Hydrotesting-and-Cleaning
Pre-test inspection and readiness
Test pressure monitoring and acceptance
Post-test inspection and documentation
MODULE 23: Non-Conformance Reports (NCR)
23-Non-Conformance-Reports-NCR
Identification of non-conformities
Root cause analysis
Corrective and preventive actions
MODULE 24: Final Inspection and Mechanical Completion Support
24-Final-Inspection-and-Mechanical-Completion-Support
Punch list preparation and clearance
As-built verification
Final acceptance documentation
MODULE 25: QA QC Reporting and Project Close-Out
25-QAQC-Reporting-and-Project-Close-Out
Daily and weekly quality reports
Dossier and handover documents
Lessons learned and quality improvement
SAES PDF EXPLANATION DETAILED MANNER
SAEP-302 – Waiver of Mandatory Engineering Requirement
SAUDI ARAMCO ENGINEERING STANDARDS (SAES)
📒 GI-1021.000 – STREET & ROAD CLOSURE, EXCAVATION, TRAFFIC CONTROL
📒 SAUDI ARAMCO MANUALS & GUIDES
📒 ACI 229R – CONTROLLED LOW STRENGTH MATERIAL (CLSM)
📒 ASTM STANDARDS – SOIL CLASSIFICATION & GRADATION
📒 ASTM STANDARDS – SOIL CLASSIFICATION & GRADATION ASTM C136 | ASTM D422 | ASTM D1140 | ASTM D2487
📒 PIP CVS02100 – SITE PREPARATION, EXCAVATION & BACKFILL
📒 RELATED CLAUSES (IMPORTANT CROSS-REFERENCES)
📒 SPECIAL TECHNICAL REFERENCES
📒 SUMMARY – MOST FREQUENTLY USED CODES ON SITE
📒 PRACTICAL UNDERSTANDING FOR SITE ENGINEERS
QUESTIONS AND ANSWERS FOR PRACTICE SAES AND OTHER INTERNATINOAL CODES USED IN OIL AND GAS
PART 1 – QUESTIONS & DETAILED ANSWERS (1–10)
PART 2 – QUESTIONS & DETAILED ANSWERS (11–30)
PART 3 – QUESTIONS & DETAILED ANSWERS (31–60)
PART 4 – QUESTIONS & DETAILED ANSWERS (61–90)
PART 5 – QUESTIONS & DETAILED ANSWERS (91–120)